Home / Cán bộ / Prof. Dr. Le Anh Tuan

Prof. Dr. Le Anh Tuan

Teaching

  • Introduction to internal combustion engine
  • Internal combustion engine fundamentals
  • Turbocharging the internal combustion engine
  • Renewable energy sources and management
  • Exhaust emissions from internal combustion engines and air pollution problem
  • Mixture formation and combustion in internal combustion engines
  • Alternative fuels for internal combustion engines
  • Advanced simulation tools for internal combustion engines.

Research Arears

  • Alternative fuels (bio-ethanol, biodiesel, bio-oil, BTL, hydrogen, LPG);
  • Mixture formation and combustion in IC. Engines;
  • Fuel consumption improvement methods;
  • Emission measurements and emission reduction measures, emission factors, emission models and emission inventories;
  • Driving cycle development;
  • Advanced simulation tools for internal combustion engines;
  • Electric vehicle

Educations

  • 2002-2005: Doctor, Internal Combustion Engines and Thermodynamics, Graz University of Technology, Austria
  • 1997-1999: Master, Internal Combustion Engines, Hanoi University of Science & Technology, Vietnam
  • 1992-1997: Engineer, Internal Combustion Engines, Hanoi University of Science & Technology, Vietnam

Selected publications

Patents

  1. Nguyen The Luong (VN),Le Anh Tuan (VN), Pham Minh Tuan (VN), “Cooling system for outdoor sparking car using a cover attached solar cells”, patent No 21349, Decision No 46231/QĐ-SHTT, June, 10, 2019, National Office of Intellectual Property of Vietnam, Ministry of Science and Technology.
  2. Le Anh Tuan, Tran Quang Vinh, Nguyen The Luong, Tran Anh Trung, “Supporting System for Carburated Gasoline Engines”, Patent, No. 20225, Decision No. 83143/QĐ-SHTT, of 20/11/2018, National Office of Intellectual Property of Vietnam, Ministry of Science and Technology.

ISI/Scopus papers

  1. Sakthivel Rajamohan, Abbhijith Hari Gopal, Karthic Raja Muralidharana, Zuohua Huang, Baranitharan Paramasivam, Tamilvanan Ayyasamy, Xuan Phuong Nguyen, Anh Tuan Le, Anh Tuan Hoang (2022), Evaluation of oxidation stability and engine behaviors operated by Prosopis juliflora biodiesel/diesel fuel blends with presence of synthetic antioxidant, Sustainable Energy Technologies and Assessments, Volume 52, Part A, August 2022, 102086
  2. Nagarajan Jeyakumar, Zuohua Huang, Dhinesh Balasubramanian, Anh Tuan Le, Xuan Phuong Nguyen, Prakash Lakshmana Pandian, Anh Tuan Hoang (2022) Experimental evaluation over the effects of natural antioxidants on oxidation stability of binary biodiesel blend, International Journal of Energy Research, 14/4/2022.
  3. Khanh Nguyen Duc, Yen-Lien T. Nguyen, Anh-Tuan Le & Tung Le Thanh (2022) Developing neural networks-based prediction model of real-time fuel consumption rate for motorcycles: A case study in Vietnam, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44:2, 3164-3177
  4. Anh Tuan Hoang, Sandro Nižetić, Kim Hoong Ng, Agis M. Papadopoulos, Anh Tuan Le, Sunil Kumar, H. Hadiyanto, Van Viet Pham (2022), “Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector”, Chemosphere, Volume 287, Part 3, January 2022, 132285
  5. Nguyen Tuan Nghia, Nguyen Phi Truong, Nguyen Xuan Khoa, Le Anh Tuan, Nguyen Van Tuan (2022), “A Comparison in Combustion Characteristics in a CVCC with Biodiesel Blends”, Energies, 2022-01-29
  6. Nguyen Ba Hung, Le Anh Tuan, Ocktaeck Lim, “Effects of working conditions on the operating characteristics of an injection system applied on CNG fueled vehicles”,Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, December 30, 2021.
  7. Tan Trung Truong, Xuan Phuong Nguyen, Van Viet Pham, Van Vang Le, Anh Tuan Le & Van Tam Bui, “Effect of alcohol additives on diesel engine performance: a review”, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, SCI Q2 (2020), IF 3.447 (2020).
  8. Anh Tuan Hoang, SandroNižetić, Kim Hoong Ng, Agis M.Papadopoulos, Anh Tuan Le, Sunil Kumarf H.Hadiyanto, Van Viet Pham, “Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector”, Chemosphere, 1/2022, 287(3), ISI Q1, IF 7.086.
  9. Parthasarathy Murugesan, Anh Tuan Hoang, Elumalai Perumal Venkatesan, Dash Santosh Kumar, Dhinesh Balasubramanian, Anh Tuan Le, Van Viet Pham, “Role of hydrogen in improving performance and emission characteristics of homogeneous charge compression ignition engine fueled with graphite oxide nanoparticle-added microalgae biodiesel/diesel blends”, International Journal of Hydrogen Energy, 9/2021, ISI Q1, IF 5.816.
  10. Yen-Lien T. Nguyen, Trung-Dung Nghiem, Anh-Tuan Le, Khanh Nguyen Duc, Duy-Hung Nguyen, “Emission characterization and co-benefits of bus rapid transit: a case study in Hanoi, Vietnam”, Atmospheric pollution research, 8/2021, 12(8), ISI  Q1, IF 4.352.
  11. Anh Tuan Hoang, Xuan Phuong Nguyen, Anh Tuan Le, Thanh Tung Huynh, Van Viet Pham, “COVID-19 and the Global Shift Progress to Clean Energy”, Journal of Energy Resources Technology, Transactions of the ASME, April 2021, 143(9): 094701, SCI Q2.
  12. Nguyen, T.N.; Khoa, N.X.; Tuan, L.A.2021, “The Correlation of Biodiesel Blends with the Common Rail Diesel Engine’s Performance and Emission Characteristics“, Energies 14, no. 11: 2986, SCIE Q1.
  13. Tran, V.D., Le, A.T., Hoang, A.T., “An experimental study on the performance characteristics of a diesel engine fueled with ulsd-biodiesel blends” International Journal of Renewable Energy Development, 5/2021, 10(2), pp. 183-190, ESCI Q3.
  14. Anh Tuan Hoang, Sandro Nizetic, Van Viet Pham, Anh Tuan Le, Van Ga Bui, Van Vang Le, “Combustion and emission characteristics of spark and compression ignition engine fueled with 2,5-dimethylfuran (DMF): A comprehensive review“, Fuel, Volume 288, 15 March 2021, SCI Q1.
  15. Anh Tuan Hoang, Meisam Tabatabaei, Mortaza Aghbashlo, Antonio Paolo Carlucci, Aykut, I.Ölçer, Anh Tuan Le, Abbas Ghassemi, “Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review“, Renewable and Sustainable Energy Reviews, Volume 135, January 2021, 110204, SCI, IF 12.11, CiteScore 25.5.
  16. Yen-Lien T. Nguyen , Anh-Tuan Le, Khanh Nguyen Duc , Vinh Nguyen Duy & Cong Doan Nguyen, “A study on emission and fuel consumption of motorcycles in idle mode and the impacts on air quality in Hanoi, Vietnam,” International Journal of Urban Sciences, 07/01/2021, SCI Q1.
  17. Duc, K.N., Nguyen, Y.-L.T., Duy, T.N., Le, A.-T., Huu, T.P., “A robust method for collecting and processing the on-road instantaneous data of fuel consumption and speed for motorcycles“, Journal of the Air and Waste Management Association, 2021, 71(1), pp. 81–101
  18. Le, V.V., Huynh, T.T., Ölçer, A., Hoang, A.T., Le, A.T., Nayak, S.K., Pham, V.V., “A remarkable review of the effect of lockdowns during COVID-19 pandemic on global PM emissions”  Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 03/12/2020, SCI, IF 1.18, 2019/Q3.
  19. Nguyen, H.P., Hoang, A.T., Nizetic, S., Nguyen, X.P., Le, A.T., Luong, C.N., Chu, V.D., Pham, V.V., “The electric propulsion system as a green solution for management strategy of CO2 emission in ocean shipping: A comprehensive review,” International Transactions on Electrical Energy Systems, 07/9/2020, ISI IF1.69, Q2.
  20. Hoang Phuong Nguyen, Anh Tuan Hoang, Anh Tuan Le, Van Viet Pham & Van Nam Tran, “Learned experiences from the policy and roadmap of advanced countries for the strategic orientation to electric vehicles: A case study in Vietnam,” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 31/8/2020, SCI, IF 1.18, 2019/Q3.
  21. Anh Tuan Le, Dang Quoc Tran, Thanh Tam Tran, Anh Tuan Hoang, Van Viet Pham, “Performance and combustion characteristics of a retrofitted CNG engine under various piston-top shapes and compression ratios“, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Published online: 10 Aug 2020, SCI, IF 1.18, 2019/Q3.
  22. Vinh Nguyen Duy, Khanh Nguyen Duc, Trung Nguyen Thanh, Long Hoang Dinh & Tuan Le Anh, “IMPLEMENTATION OF FUEL ADDITIVE MAZ 100 FOR PERFORMANCE ENHANCEMENT OF COMPRESSED NATURAL GAS ENGINE CONVERTED FROM IN-USED GASOLINE ENGINE“, Journal of the Air & Waste Management Association (SCI), 2020.
  23. Yen-Lien T. Nguyen, Ngoc Dung Bui, Trung-Dung Nghiem, Anh-Tuan Le, “GPS data processing for driving cycle development in Hanoi, Vietnam”, Journal of Engineering Science and Technology, Vol. 15, No. 2 (2020) 1429 – 1440 © School of Engineering, Taylor’s University, ESCI Q2.
  24. Tuan nghia Nguyen, Minh hieu Pham, Tuan Le Anh, “Spray, combustion, performance and emission characteristics of a common rail diesel engine fueled by fish-oil biodiesel blends”, Fuel, Volume 269, 1 June 2020, 117108, SCIE Q1, IF5.8, rank 10/197 in Energy Engineering and Power Technology.
  25. Duc Luong Cao, Guang Hong, Anh Tuan Le“ Applying chemical heat storage to saving exhaust gas energy in diesel engines: Principle, design and experiment”, Journal of Energy Storage, Volume 28, April 2020, 101311, SCIE Q1, IF 4.17, 26/197.
  26. Duc Luong Cao, Guang Hong and Tuan Anh Le, “Numerical investigation of heat storage in a chemical heat storage system for saving exhaust gas energy in internal combustion engines“, IOP Conference Series: Earth and Environmental Science, Scopus, 2020.
  27. Trung-Dung Nghiem, Yen-Lien T. Nguyen, Tuan Le Anh, Ngoc-Dung Bui, Huu-Tuyen Pham “Development of the specific emission factors for buses in Hanoi, Vietnam,” Environmental Science and Pollution Research, Online 21.6.2019, Q2, IF 2.914.
  28. Vinh Nguyen Duy, Khanh Nguyen Duc, Doan Nguyen Cong, Hoi Nguyen Xa, Tuan Le Anh “Experimental study on improving performance and emission characteristics of used motorcycle fueled with ethanol by exhaust gas heating transfer system,” Energy for Sustainable Development , Volume 51, August 2019, Pages 56-62, online 12.6.2019,  2018/Q2) https://doi.org/10.1016/j.esd.2019.05.006.
  29. Anh Tuan Hoang, Xuan Phuong Nguyen, Anh Tuan Le, Minh Tuan Pham, Trung Huan Hoang, Abdel Rahman M. Said Al-Tawaha & Surfa Yondri “Power generation characteristics of a thermoelectric modules-based power generator assisted by fishbone-shaped fins: Part II – Effects of cooling water parameters” Journal Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,  Published online: 31 May 2019 (SCI, 2018/Q3).
  30. Anh Tuan Hoang, Viet Dung Tran, Van Huong Dong, Le Anh Tuan, “An experimental analysis on physical properties and spray characteristics of an ultrasound-assisted emulsion of ultra-low-sulphur diesel and Jatropha-based biodiesel,” Journal of Marine Engineering & Technology , Published online: 21 Mar 2019 (Engineering; Ocean Engineering, SCIE,Q2).
  31. T. Hoang, A. T. Le, and V. V. Pham, “A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel,” Fuel, vol. 244, pp. 159–175, Feb. 2019 (SCI, IF2017 = 4.908, ENERGY & FUELS: 19 of 97, Q1)
  32. T. Hoang and A. T. Le, “Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated Jatropha oil and fossil diesel fuel,” Biofuel Research Journal, vol. 0, Mar. 2019 (SCOPUS (ESCI), Q1)
  33. Nguyen Duc, V. Nguyen Duy, L. Hoang-Dinh, T. Nguyen Viet, and T. Le-Anh, “Performance and emission characteristics of a port fuel injected, spark ignition engine fueled by compressed natural gas,” Sustainable Energy Technologies and Assessments, vol. 31, pp. 383–389, Feb. 2019 [SCOPUS (ESCI), CiteScore 2017 = 3.79, Energy Engineering and Power Technology: 22 of 192, Q1]
  34. -L. T. Nguyen, T.-D. Nghiem, A.-T. Le, and N. D. Bui, “Development of the Typical Driving Cycle for Buses in Hanoi, Vietnam,” Journal of the Air & Waste Management Association, Nov. 2018.(SCI, IF2017 = 1.742, ENVIRONMENTAL SCIENCES: 141 of 242, Q3)
  35. L. Anh, V. N. Duy, H. K. Thi, and H. N. Xa, “Experimental Investigation on Establishing the HCCI Process Fueled by N-Heptane in a Direct Injection Diesel Engine at Different Compression Ratios,” Sustainability, vol. 10, no. 11, p. 3878, Oct. 2018 (SCIE, IF2017 = 2.075, ENVIRONMENTAL SCIENCES: 120 of 214, Q2)
  36. T. Pham, A. T. Hoang, A. T. Le, A. R. M. S. Al-Tawaha, V. H. Dong, and V. V. Le, “Measurement and Prediction of the Density and Viscosity of Biodiesel Blends,” International Journal of Technology, vol. 9, no. 5, p. 1015, Oct. 2018. (SCOPUS, Q2)
  37. T. Hoang and A. T. Le, “A review on deposit formation in the injector of diesel engines running on biodiesel,” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Taylor & Francis, pp. 1–16, Sep. 2018 (SCI, IF2019 = 1.07, Q3).
  38. Duc-Khanh Nguyen, Anh-Tuan Le, Thu-Huong Tran Thi, and Ming-Hsun Wu, “A 1-D Numerical Analysis on the Control of HCCI Combustion in a CI Engine Through Exhaust Gas Recirculation,” Journal of the Chinese Society of Mechanical Engineers, vol. 39, no. 2, pp. 179–186, Apr. 2018. (SCIE, IF2017 = 0.112, ENGINEERING, MECHANICAL: 126 of 128, Q4).
  39. Duc Luong Cao, Guang Hong and Tuan Anh Le, “Investigation of chemical heat storage processes for recovering exhaust gas energy in internal combustion engines“, Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018, (Scopus)
  40. Duc Luong Cao, Guang Hong, Tuan Le Anh, “Preliminary comparison of chemical heat storage systems for saving exhaust gas energy in gasoline and diesel engines“, proceedings of the Eleventh Asia-Pacific Conference on Combustion, APCC 2017, conference rank B, Sydney 2017 (SCOPUS)
  41. A. Tuan, N. T. Luong, and K. N. Ishihara, “Low-Temperature Catalytic Performance of Ni-Cu/Al2O3 Catalysts for Gasoline Reforming to Produce Hydrogen Applied in Spark Ignition Engines,” Catalysts, vol. 6, no. 3, p. 45, Mar. 2016. (SCIE, IF2017 = 3.465, CHEMISTRY, PHYSICAL: 55 of 147, Q2)
  42. Tuan Le Anh, Khanh Nguyen Duc, Huong Tran Thi Thu, Tai Cao Van, “Improving Performance and Reducing Pollution Emissions of a Carburetor Gasoline Engine by Adding HHO Gas into the Intake Manifold,” SAE International  paper number 2013-01-0104, DOI:10.4271/2013-01-0104. (SCOPUS, Q2)
  43. Thai Khanh Phong, Dam Hoang Phuc, Le Anh Tuan, Thai Ha Phi, Kazuaki Hiramatsu, “Applications of Passive Sampling Techniques in Monitoring Organic Pollutants in the Environment,” Journal of the Faculty of Agriculture Kyushu University, vol. 57, no. 1, pp. 169-174., 2012. (SCI, IF2010 = 0.24, AGRICULTURE, MULTIDISCIPLINARY: 41 of 55, Q3)
  44. Le Anh T, Reksowardojo I, Wattanavichien K, “Utilization of biofuels in diesel engines”, Book chapter in Handbook of Biofuels Production: Processes and Technologies, Woodhead Publishing, DOI: 10.1533/9780857090492.4.611, 2011
  45. Tuan Anh Le, Truc The Nguyen, 2011, Experimental Study on Performance, Emissions and Combustion Characteristics of a Single Cylinder Dual Fuel LPG/Diesel Engine, SAE International paper number 2011-32-0562, DOI: 10.4271/2011-32-0562.(SCOPUS, Q2)
  46. Robert JOUMARD, Juhani LAURIKKO, Le Anh Tuan, et.al. 2009. Accuracy of exhaust emission factor measurements on chassis dynamomete Journal of the Air & Waste Management Association, No.59, p695-703. (SCI, IF2017 = 1.742, EENGINEERING, ENVIRONMENTAL: 32 of 50, Q3)
  47. Le Anh, T., Hausberger, S., Zallinger, M., 2006: Correction for accurate instantaneous emission measurements of passenger cars, Air pollution 14th, Wessex Institute of Technology-WIT express, ISBN 1-84564-165-5, ISSN: 1746-448X (print), ISSN: 1743-3541 (on-line), UK, 2006. (SCOPUS)
  48. Heiden B., Pretterhofer G., Le Anh T., Ivanisin M., Sturm P. J., 2005: Exhaust gas dispersion effects under controlled environmental conditions; 10th EAEC (European Automotive Engineers Cooperation) Congress, ISBN 86-80941-30-1, JUMV, Beograd, 2005. (SCOPUS).

Other papers

  1. Nguyễn Phi Trường, Nguyễn Tuấn Nghĩa, Nguyễn Văn Tuân, Lê Anh Tuấn, “Nghiên cứu thực nghiệm đánh giá quá trình cháy của nhiên liệu trong buồng cháy thể tích không đổi (CVCC)”, Tạp chí Khoa học & Công nghệ, Trường ĐH Công nghiệp HN, 8/2021.
  2. Tran Dang Quoc, Tran Thanh Tam, Le Anh Tuan, Experimental investigation into the influence of compression ratio on operating characteristics of single cylinder CNG engine with port injection, The first International Conference on Material, Machines and Methods for Sustainable Development, 5/2018.
  3. Trần Văn Hoàng, Nguyễn Thế Lương, Nguyễn Văn Thắng,Lê Anh Tuấn, Phạm Minh Tuấn, Bùi Văn Chinh, Nghiên cứu đặc tính kinh tế kỹ thuật và phát thải của động cơ xe máy phun xăng điện tử khi sử dụng bộ xúc tác giàu hydro Cu-Ni/Al2O3 sau khi chạy bền 5.000km, Tạp chí Khoa học công nghệ Trường Đại học Công nghiệp Hà Nội, Số 44, 02/2018.
  4. Lê Đăng Đông, Phạm Minh Tuấn, Trần Anh Trung, Lê Anh Tuấn, Xây dựng mô hình động cơ phun xăng xe máy sử dụng hỗn hợp giàu hydro làm việc theo thời gian thực, Tạp chí Giao thông vận tải, 03/2018.
  5. Lê Đăng Đông, Phạm Minh Tuấn, Trần Anh Trung, Lê Anh Tuấn, Nghiên cứu xây dựng mô hình cháy động cơ phun xăng xe máy sử dụng hỗn hợp giàu hydro dạng phụ gia làm việc ở chế độ cháy nghèo, Tạp chí Cơ khí Việt Nam, 12/2017.
  6. Lê Đăng Đông, Phạm Minh Tuấn, Trần Anh Trung, Lê Anh Tuấn, Nghiên cứu xác định các kỳ làm việc của động cơ phun xăng xe máy dùng cảm biến áp suất đường nạp, Tạp chí Khoa học & Công nghệ, Trường Đại học Công nghiệp Hà Nội, 10/2017.
  7. Trần Thanh Tâm, Trần Đăng Quốc, Lê Anh Tuấn, Nghiên cứu mối tương quan giữa tỷ số nén và trị số ốc tan yêu cầu ở động cơ diesel một xylanh sử dụng nhiên liệu CNG, Tạp chí Giao thông vận tải, 11/2017.
  8. Anh Tuan Hoang Viet Dung Tran, Anh Tuan Le, Van Huong Dong, Methods of operating the marine engines by ultra-low sulfur fuel to aiming to satisfy MARPOLAnnex VI, Advances in Natural and Applied Sciences, ISSN 1995-0772, Vol.11, No.12, pp 34-40, 2017.
  9. Nguyen Tuan Nghia, Le Anh Tuan, Nghiên cứu ảnh hưởng của nhiên liệu biodiesel từ các nguồn gốc khác nhau đến tính năng và phát thải của động cơ diesel, Tạp chí Khoa học & Công nghệ, Trường Đại học Công nghiệp Hà Nội, ISSN 1859-3585, p. 276-280, 2017.
  10. Lê Anh Tuấn, Tổng quan về nghiên cứu và sử dụng nhiên liệu thay thế trên động cơ đốt trong, Kỷ yếu Hội nghị Khoa học và Công nghệ toàn quốc về Cơ khí – Động lực, ISBN: 978-604-73-5603-4, p.287-293, 2017.

Master students

PhD students

  1. Study on emission reduction potentials for turbocharged diesel engine buses.
  2. Investigation of effects of fuel additives domestically developed for biofuels on technical and economical characteristics of the engines.
  3. Study on application of LPG/diesel dual fuel in diesel conventional engines.
  4. Research on potential improvement of bioethanol ratio in the bioethanol-gasoline blend utilized in gasoline engines.
  5. Study on effects of biodiesel produced in Vetnam on performance and exhaust emission characteristics of diesel engines.
  6. Investigation of establishing homogeneous charge compression ignition (HCCI) and potentials to extend the HCCI regime for the single cylinder engine.
  7. HHO gas addition to internal combustion engine for combustion improvement and better fuel eficiency.
  8. Application of pure vegetable oil in diesel engines
  9. Research on the use of ULSD-Biodiesel fuel blend on marine diesel engines
  10. Impacts of structure and operating parameters on CNG engine combustion characteristics.
  11. Study on mixture formation and combustion of HCCI process in constant volume combustion chamber.
  12. Converted HCCI engine operates with dual fuels
  13. Energy consumption model of the two wheelers vehicle based on real world driving cycle.

Books

  1. Le Anh Tuan, et.al,. Alternative fuels for internal combustion engine, Bach Khoa publishing house, 2017.
  2. Zusman, Srinivansan, Dhakal, et.al., Low carbon transport in Asia: Strategies for optimizing co-benefits, book chapter: Quantifying co-benefits from low carbon transport in Hanoi, Vietnam (Lee Shipper, Wei-shiuen NG, Le Anh Tuan, and Hans Oern), Earthscan, Abingdon, Oxon OX14 4RN, simultaneously published in the USA and Canada, 2012.
  3. Luque, J. Campelo, J. H. Clark, T. A. Le, et.al., Handbook of biofuels production: Processes and technologies, Woodhead Pulishing House, ISBN 978 1 84569 679 4, ISBN-13: 978 1 84569 679 5, UK, 2011
  4. Lee Shipper, Tuan Le Anh, Hans Orn, Measuring the Invisible: Quantifying Emissions Reductions From Transport Solution, Hanoi Case Study, World Resources Institute, USA, 2008
  5. Vo Nghia, Le Anh Tuan, Turbocharging the internal combustion engine. Vietnamese Science and Technology Publisher, 2008.
  6. Robert JOUMARD, Michel ANDRÉ, Juhani LAURIKKO, Tuan LE ANH, et.al. Accuracy of exhaust emissions measurements on vehicle bench – Artemis deliverable 2. Inrets report, Bron, France, n°LTE 0522, 140 p, 2006.

Awards & Honour

  • 2019: Third Class Labor Order, Awarded by the Government of Vietnam
  • 2013: Certificate of merit of the Prime Minister for great contribution to education, science and technology activities
  • 2011: Certificate of merit of the Minister of Education and Training for great contribution to science and technology activities during 2006-2010
  • 2010: Certificate of merit for the 3rd price of the engineering creative award (VIFOTEC) 2009
  • 2009: Certificate of merit of the Minister of Education and Training for distinguished lecturer in school year 2007-2008
  • 1996: Golden medal for the first prize of the national Olympic on fluid mechanics.

Dự án hiện tại /Project

  1. 2020-2021: Team leader, Study of electric mobility development in Vietnam, NDC Transport Initiative for Asia, GIZ and MOT Vietnam.
  2. 2018-2020: Main member of a national research project No. 08BS/HĐ-KHCN/NSCL, entitled “Research and development of technical regulations for single cylinder diesel engine testing”, PI by Vietnam Motors and Agricultural Machinery Corporation (VEAM).
  3. 2018-2019: National consultant of “technology section” of the project “Addressing climate change in transport”, Vietnam transport knowledge series, supported by Australia – WB group strategic partnership in Vietnam, Government of Germany and NDC Partnership support facility.
  4. 2016-2018: Coordinator of the JSPS Core-to-Core project: Establishment of Research Hub for Compact Mobility Model in the ASEAN Region among 4 universities: Nagoya Univ., Chulalongkorn Univ., Hanoi Univ. of Technology and National Univ. of Laos
  5. 2016-2018: Member of the European quality COurse system for Renewable Energy Development (ECO-RED) Erasmus+ project among 7 universities of EU and Vietnam
  6. 2014-2015: Principle investigator of a national research project entitled “Hydrogen rich gas production by catalytic reforming of gasoline to supply to the spark ignition engines aiming higher engine efficiency and emission reduction” coded KC.05.24/11-15
  7. 01-12/2012: Principle investigator of a national research project on improvement of fuel consumption and exhaust emissions for spark ignition engine by providing hydrogen rich gas mixture to the engine.
  8. 2011-2012: Principle investigator of a national research project on utilization of gasoline-bioethanol blends in in-used engines and vehicles in Vietnam.
  9. 2007-2009: Responsible for a branch of a national research project on production and utilization of biodiesel based on cat-fish fat in Vietnam.
  10. 2008-2009: Principle investigator of a research project funded by Hanoi’s People Committee on development of a local real world driving cycle for motorcycles for Hanoi.
  11. 2007-2008: Involve in the project of Coupling GHG Emission Reductions with Transport and Local Emissions Management for Hanoi, running by EMBARQ, WRI, USA. Responsible for a research on impacts of gasoline/bio-ethanol blends E5 and E10 on in-used motorcycles and passenger cars.
  12. 2006-2007: Involve in Swiss – Vietnam Clean Air Program (SVCAP), Clean truck pilot project.

Professional services

  • Co-Chair of the On Road Vehicle Session, National Conference on Traffic Safety of Vietnam; Chair of The 30th International Symposium on Transport phenomena 2019 (ISTP30); Chair of The 7th AUN/SEED-Net Regional Conference in Mechanical and Manufacturing Engineering 2014 (RCMME2014); Chair of AUN/SEED-Net Joint Regional Conferences in Transportation, Energy and Mechanical Manufacturing Engineering (RCTEMME2021); Chair of Vietnam EV Forum 2019.
  • Member of International Society of Automotive Engineering
  • Member of the national standardized and regulation committee for internal combustion engines and on gasoline, diesel and biofuels
  • Committee Chair, The Council of Asian Science Editors (CASE); Executive member, Vietnam Association of Science Editing (VASE)
  • Member of Editorial Board: Journal of Mechanical Engineering Research and Developments (Scopus Q3); International Journal of e-Navigation and Maritime Economy (e-Navi, Scopus indexed); Journal of Research and Applications in Mechanical Engineering (JRAME); Highlights of Vehicles
  • Main member of editorial board, Journal of Science and Technology Technical Universities; editorial board member of Vietnam Mechanical Engineering Journal; Journal of Science and Technology, University of Transport and Communication; Journal of Science and Technology Ho Chi Minh city University of Transport; Journal of Science and Technique, Le Quy Don University.